查看完整版本: [-- LINK-ALL新版驱动V5.1 --]

哈罗CQ火腿社区 -> BA3DP产品专区 -> LINK-ALL新版驱动V5.1 [打印本页]

登录 -> 注册 -> 回复主题 -> 发表主题

BD3RJ

2008-01-17 15:58

LINK-ALL新版驱动V5.1

附件是link-all驱动安装教学，新采用flash演示，方便大家使用。
安装方法：
1卸载以前安装的驱动
2拔掉link-all的usb插头
3安装新的驱动

windows 2000/xp/server 2003/vista用户点这里-官方下载

cp210x windows driver v5.1a release notes
copyright (c) 2007 silicon laboratories, inc.

this release contains the following components:

* x64 directory
* silabser.sys
* silabenm.sys
* x86 directory
* silabser.sys
* silabenm.sys
* cp210xvcpinstaller.exe (v2.3)
* setup.ini
* silabser.cat
* slabvcp.inf
* releasenotes.txt (this file)

driver installation
-------------------

see kit user's guide for installation instructions.

release dates
-------------
cp210x windows driver v5.1a - november 2, 2007
cp210x windows driver v5.1 - october 16, 2007

known issues and limitations (5.1)
----------------------------------

the driver has a slower performance than the previous versions

note: the above issue is being addressed currently and should be
fixed in a later release of the vcp drivers.

cp210x windows driver revision history
--------------------------------------
version 5.1a
corrections
-----------
release notes updated to remove warning.
driver installer updated to v2.3.

version 5.1
corrections
-----------
multiple devices can be used now with no problems.
driver now correctly works with the mscomm activex control.
******************************************************
cp210x驱动程序：2008.03.05更新
cp210x驱动(2000/xp/server 2003/vista v3.11)
cp210x驱动(linux 2.4/2.6)
cp210x驱动(osx/os9)
******************************************************

husy	2008-01-23 09:21
好像忘记了说要把连接ｌｉｎｋ－ＡＬＬ与电台的控制线拔掉，累到我以为电脑性能太差，不能用新驱动。

BD3RJ	2008-01-23 12:43
' 好像忘记了说要把连接ｌｉｎｋ－ＡＬＬ与电台的控制线拔掉，累到我以为电脑性能太差，不能用新驱动。 ' 我发的帖子不仔细看,良心大大地..............

BY1CJL	2008-02-21 16:22
学习了，实际上这种协议都是先断开硬件，安装完软件驱动后，再连接硬件的当年的扫描仪.................... 嘿嘿

bh1cux

2008-02-29 13:03

3rj:
驱动5.1比5.0有那些优点，谢谢！如果不太高哪去，就不重装了，装5.0时老出错，可能是我机器的问题。

另一个问题想请教一下：
用link－all3.0 机器是2720 电脑是笔记本怎样应用sstv rtty mmvari 暂时没短波机。平时就用用link－all3.0 连接echolink ，对方听我说话有杂音，电源电台都没问题特请教一下谢谢！！！

BD3RJ

2008-02-29 22:23

3rj:
驱动5.1比5.0有那些优点，谢谢！如果不太高哪去，就不重装了，装5.0时老出错，可能是我机器的问题。
另一个问题想请教一下：
用link－all3.0 机器是2720 电脑是笔记本怎样应用sstv rtty mmvari 暂时没短波机。平时就用用link－all3.0 连接echolink ，对方听我说话有杂音，电源电台都没问题特请教一下谢谢！！！

'
修正了些小错误，主要还是强化了的对winxp64的支持。
在ic2720上应用sstv rtty mmvari 很容易，就是设对了ptt就ok了，参见手册。
最好能录个音过来，我估计是笔记本电源引起的，你拔了它看看还有吗？

bh1cux

2008-03-02 22:47

修正了些小错误，主要还是强化了的对winxp64的支持。
在ic2720上应用sstv rtty mmvari 很容易，就是设对了ptt就ok了，参见手册。
最好能录个音过来，我估计是笔记本电源引起的，你拔了它看看还有吗？

'

谢谢3rj回复！
晚上试了一下，sstv mmvari 可以了，谢谢！
这几天有个问题出现了，就是usb口老出错，老是出现无法识别现象，别的usb设备都没问题，出现状况后只能重启笔记本，3rj这种情况是哪的问题，特请教一下，谢谢！

BD3RJ	2008-03-02 23:43
' 谢谢3rj回复！晚上试了一下，sstv mmvari 可以了，谢谢！这几天有个问题出现了，就是usb口老出错，老是出现无法识别现象，别的usb设备都没问题，出现状况后只能重启笔记本，3rj这种情况是哪的问题，特请教一下，谢谢！ ' 估计是射频干扰 1，降低发射功率 2，usb线加装磁环 3，电脑送我

bh1cux	2008-03-03 20:38
' 估计是射频干扰 1，降低发射功率 2，usb线加装磁环 3，电脑送我 [表情] [表情] ' 抄收抄收！谢谢！我一直用小功率发射。我找磁环试试。给你个笔记本！。。。。

bg4kyf	2008-03-10 22:10
还有货吗?

BA4RF

2008-03-30 13:29

这个驱动昨天差点把4xng同志逼疯了！
给我打了好些个电话，说logger32等都能控制，就是要用的wintest不能用。
重装了wt无数版本，重装了操作系统，都不行。
晚上我远程登录上他的机器看了一下，发现确实有问题，提示打不开端口。但logger32又控制自如。再试wt,发现本地com1口打开是没有问题的。说明还是端口本身有问题。
退出后建议从linkall驱动的角度查问题。传了几个老版本的驱动给他之后睡觉。

早上起来看到他的留言：成功！

联想到我前一段时间用dxlab commander不能控制的遭遇，估计也是这个原因，看来晚上有必要试试老的驱动。

BD3RJ

2008-03-30 18:15

cp210x windows driver v5.2.1 release notes
copyright (c) 2008 silicon laboratories, inc.

this release contains the following components:

* x64 directory
* silabser.sys
* silabenm.sys
* x86 directory
* silabser.sys
* silabenm.sys
* cp210xvcpinstaller.exe (v2.4)
* setup.ini
* silabser.cat
* slabvcp.inf
* releasenotes.txt (this file)

driver installation
-------------------

see kit user's guide for installation instructions.

release dates
-------------
cp210x windows driver v5.2.1 - january 30, 2008

cp210x windows driver revision history
--------------------------------------

version 5.2.1
corrections
-----------
fixed a bug caused by the previous fix for incomplete reads in hyperterminal.
fixed a bug when using the manufacturing dll where no data comes back from the part for
customization type settings in vista 64.

version 5.2
corrections
-----------
fixed a bad_pool_header blue screen issue.
fixed a crash during surprise disconnect in hyperterminal on vista.
fixed a problem causing various incomplete reads, sometimes visible in hyperterminal.

new features/enhancements
-------------------------
cp210xvcpinstaller.exe updated to v2.4.

windows 2000/xp/server 2003/vista用户点这里v5.21官方下载

BG4XNG	2008-03-30 23:23
谢谢rf解决了问题，一天全手动切换的感觉真好！什么叫人工智能？这就是！借花献佛，把驱动发给大家，以供鉴赏！

conjuring	2008-03-31 11:12
我也想买一个来玩，价格有优惠吗？

BD3RJ

2008-05-22 11:32

cp210x windows driver v5.2.2 release notes
copyright (c) 2008 silicon laboratories, inc.

this release contains the following components:

* x64 directory
* silabser.sys
* silabenm.sys
* x86 directory
* silabser.sys
* silabenm.sys
* cp210xvcpinstaller.exe (v2.4)
* setup.ini
* silabser.cat
* slabvcp.inf
* releasenotes.txt (this file)

driver installation
-------------------

see kit user's guide for installation instructions.

release dates
-------------
cp210x windows driver v5.2.2 - april 17, 2008

cp210x windows driver revision history
--------------------------------------

version 5.2.2
corrections
-----------
fixed a bug that was causing random bluescreens after a device is opened and closed.

http://www.silabs.com/public/documents/software_doc/drivers/microcontrollers/interface/en/cp210x_vcp_win2k_xp_s2k3.exe

husy	2008-07-25 11:27
最新的版本在这里：https://www.silabs.com/support%20documents/software/cp210x_vcp_win2k_xp_s2k3.zip

liangbg	2008-08-02 02:17
老了，弦也调不准了。折腾了一晚上，也没能装上驱动！强行手工添加硬件也不行。

ba3dp	2008-08-02 10:09
试试楼上那个驱动。

liangbg	2008-08-03 00:10
' 试试楼上那个驱动。 ' 都试过了，结果一样。

BH1DIY	2008-08-03 19:31
今天帮ba1ds安装驱动还是装不上用我自己的笔记本就没有问题超级郁闷

liangbg	2008-08-03 22:34
问题解决了，折腾了几天才发觉——是那根打印机线有问题，换了就能找到端口了。

ba3dp	2008-08-04 10:14
盒子里面配的usb电缆么？

liangbg	2008-08-04 12:29
' 盒子里面配的usb电缆么？ '就是配的那根一头是usb、另一头是打印机口的电缆。

ba3dp	2008-08-04 12:49
不通，还是不好用？您帮忙折腾清楚了，我找造电缆的去。

liangbg	2008-08-04 14:20
' 不通，还是不好用？您帮忙折腾清楚了，我找造电缆的去。 '通不通我还没量，但装完驱动后插上没反应，换电缆后插上就找到硬件了。估计是芯线细了或接触不良，导致供电不足，导致系统认不出。

BD7BS	2008-08-04 16:07
现在，正在用5.3的好像还稳定。

ba3dp	2008-08-04 21:13
#25,我也看看，不行找他去。

ba3dp	2008-08-04 21:29
刚才测试过了，整个压降小于0.15v（包含保险电阻），可能是接触不好。

VR2KW	2008-08-04 22:03
5.3的下载路径 https://www.silabs.com/support%20documents/software/cp210x_vcp_win2k_xp_s2k3.zip

BG1RCR	2008-08-04 23:23
好哇，装上了很爽

osagem	2008-10-23 17:08
路过一下，以后好找

BA4RF	2008-10-23 17:31
3dp：想知道怎么样既用mmtty发fsk又用log/contest软件控制频率吗？

BG2UKY	2008-12-01 23:18
留个记号！备用！

BH7IUQ	2009-03-26 15:50
新手在学习中！

BG3PCH	2009-03-30 00:09
驱动已经更新到5.4了 https://www.silabs.com/pages/downloaddoc.aspx?fileurl=support%20documents/software/cp210x_vcp_win2k_xp_s2k3.zip

BD3RJ	2009-08-26 13:59
version 5.4.24 corrections ----------- fixed a bug which caused a random crash if a write took longer than normal to complete new features/enhancements ------------------------- whql certified for xp/2000/2003/vista(32/64) xp https://www.silabs.com/support%20documents/software/cp210x_vcp_win2k_xp_s2k3.zip win7 https://www.silabs.com/support%20documents/software/cp210x_vcp_win7.zip

XX9LT	2009-08-26 14:03
' 3dp：想知道怎么样既用mmtty发fsk又用log/contest软件控制频率吗？ ' 請參考「置顶: 706mkiig不能發射」一文，謝謝

BD3RJ	2009-12-05 04:44
win7驱动 http://www.xhl.com.cn/xhl/downfile/cp210x_vcp_win7.zip wince驱动 6.0 http://www.silabs.com/support%20documents/software/vcp_wince60.zip 5.0 http://www.silabs.com/support%20documents/software/vcp_wince50.zip

bd7anx	2010-06-26 17:12
目前最新的驱动是多少呀？怎么下载不了呀？

ba3dp	2010-06-26 21:32
http://www.xhl.com.cn/download.asp

BA3OE

2010-10-30 23:37

windows xp/server 2003/vista/7 (v6.1)
version 6.1
corrections
-----------
corrected a memory leak which could bog the system down after extended use of a contiuously
opened com port, and conditionally yield bluescreens on certain systems

corrected a problem where an io reqest would sometimes return a busy status to
user mode, instead the queue is restarted if necessary before adding an io request
to the queue

corrected a condition which would blue screen on cancelling write request that hasn't been
fully sent out usb

corrected the capabilites return value, which incorrectly reported that timeouts are not supported

corrected several queue size return values, which affected behavior in the mscomm control

corrected dtr/rts value on device insertion, visible when serial enumeration is disabled

corrected the ability to override baud rate and line control from the inf file

http://www.silabs.com/support%20documents/software/cp210x_vcp_win_xp_s2k3_vista_7.exe

BG2UE	2011-07-13 21:36
download for windows xp/server 2003/vista/7 (v6.3a) the cp210x manufacturing dll and runtime dll have been updated and must be used with v6.0 and later of the cp210x windows vcp driver. application note software downloads affected are an144sw.zip, an205sw.zip and an223sw.zip. if you are using a 5.x driver and need support you can download archived application note software.

BG2ITG	2011-11-15 23:43
补充下载地址 http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx 点击 vcp driver kit 这行即可下载最新驱动

查看完整版本: [-- LINK-ALL新版驱动V5.1 --] [-- top --]

Powered by phpwind v8.7 Code ©2003-2011 phpwind
Time 0.021740 second(s),query:5 Gzip enabled